Darrell Walker writes:
>>My current project is to repaint the inside of my LBC....
>> I understand that
>>bondo will absorb moisture, not good since the bottom side may
>>be unpainted....
Roland Dudley writes:
>There are fillers designed for marine use. Some hardware stores
>carry them but you can also check with a local boat supply place.
>They are not as soft as bondo but that shouldn't matter in this
>case.
There is a very good product called Marine-Tex. It consists of two parts,
the filler and a catalyst. It does a very good job and it's totally waterproof
(and fuel proof and just about anything else proof). At your local marine
supply store and better hardware stores everywhere. I've used it many
times with very good results.
___ __ __ __ __ Alan Dahl
/ / / / / /__/ /__/ /__/ / / North American MORPHO Systems
/ / / /__/ / \ / / / /__/ 1145 Broadway Plaza
Tacoma, WA. 98402, USA
PH: 1 (206) 593-8021
FAX: 1 (206) 591-8856 We shall not cease from exploration
...amc-gw!morpho!alan And the end of all our exploring
Will be to arrive where we started
Standard disclaimer applies... And know the place for the first time.
- T.S. Eliot
|