bricklin
[Top] [All Lists]

74 EGR valve replacement

To: "bl" <bricklin@autox.team.net>
Subject: 74 EGR valve replacement
From: "Greg Schroeder" <gschroeder@comcast.net>
Date: Tue, 17 May 2005 13:21:26 -0500
In trying to get the adjustments correct on the Edelbrock 1406 I decided to
replace the EGR valve and vacuum hoses.  I removed it (which required the
purchase of a stubby 1/2 wrench to remove the back bolt) and compared it to
the one that I was given at the Parts Store.  From checking my 1974 AMC
Service manual the new one that I received appears to be like the one
indicated as California Only due to the appearance of the Pintle (opening at
the bottom of the EGR).  The part has a washer cross reference to this part so
it appears it may be OK. Does anyone know if this will be an issue if I
installed this one?  I would hope this would just mean less bad emissions, but
it could be more.

Greg 0036




<Prev in Thread] Current Thread [Next in Thread>
  • 74 EGR valve replacement, Greg Schroeder <=