Sika flex makes a marine adhesive that is specifically designed to bond
fiberglass to steel. the Norton adhesives are very good as long as you get
the right one for the application.
You must get a flexible adhesive because the door flexes. If you use a rigid
one such as epoxy it will let go at the flex points them water gets in and
the bond totally fails.
Rick R
On 5/12/05 4:13:18 PM, Dennis K. (dennikro@hotmail.com) wrote:
> I'm getting ready to attach my door skins and in looking at the parts
list,
> I see the 3M Urethane listed as an option. As this is technically a
> windshield/glass adhesive, what are my other options?
|