Pugs,
They aren't easy. I had to use two external plus an internal compressor.
The arms on the internal compressor weren't long enough to get both sides of
the spring at the same time so I used one arm.
Marvin
In a message dated 2/4/00 6:25:49 PM Mountain Standard Time,
jimp@SALT.FirstIndustrial.com writes:
<< How hard are the front springs to change? I have changed them on other
cars,
corvette, caddies etc but i seem to recall a discussion on this list that
the Brick is a real bear to swap. Pugs
>>
|