I've never given it much thought, but rather than a dryer, a tank drain is
probably what's needed. Just like on a regular shop compressor. With the
system pumped up, opening a valve in the bottom of the tank would dispel
virtually all the moisture since water will accumulate at the lowest point.
GM
-----Original Message-----
>I am glad to hear that this issue isn't a big problem in practice since
>finding a dryer small enough to fit this application isn't going to be
>easy. Most dryers are designed for large applications. However, I
>might add an oiler just to be on the safe side as an oiler not only
>benefits the valves and pistons, but also improves the life of the
>compressor.
>
>George Schiro
>
>
>
|