Re: question about power drills (on topic, aren't power tools

[Dennis Clark <d-clark@pacbell.net>]

I use a 12v DeWalt impact (1/2") [I have other DeWalt 12v tools] and  
a 75 Ft-lb Torque-Stick. The impact breaks them loose, spins off and  
on, and with the Torque-Stick it won't overtighten. I finish with a  
torque wrench set to 80 Ft-lb.

Torque-Stick (http://www.torquestick.com/) is indispensible when  
using air tools with really high torque. Check it out!

Dennis Clark