ba-autox
[Top] [All Lists]

Re: Couple of Solo II vehicles on ba.market.vehicles...

To: Jim Ochi <jochi@liquidaudio.com>, James Creasy <jcre@pacbell.net>,
Subject: Re: Couple of Solo II vehicles on ba.market.vehicles...
From: Scot Zediker <roadsterboy@earthlink.net>
Date: Wed, 25 Oct 2000 09:27:08 -0400 (EDT)
I don't think power had anything to do with it.  Katie was already way out 
there before she ever sat in an M3. :)

Scot

------Original Message------
From: Jim Ochi <jochi@liquidaudio.com>
To: Scot Zediker <roadsterboy@earthlink.net>, James Creasy <jcre@pacbell.net>, 
navid@interwoven.com, ba-autox@autox.team.net
Sent: October 25, 2000 2:58:46 AM GMT
Subject: Re: Couple of Solo II vehicles on ba.market.vehicles...


No, please don't put more power in your Miata - power seems to do something 
weird to Miata drivers.  Just look at what's happening to Katie....

:-)

Jim


At 07:54 PM 10/24/00 -0700, Scot Zediker wrote:
>I can fit a 302 in my car with some work.  Problem is, it won't handle
>anymore if I do that.  I'll probably go the F/I route if I ever decide I
>need more power in my Miata.
>
>Scot
>
>----- Original Message -----
>From: "James Creasy" <jcre@pacbell.net>
>To: <navid@interwoven.com>; <ba-autox@autox.team.net>
>Sent: Tuesday, October 24, 2000 6:26 PM
>Subject: Re: Couple of Solo II vehicles on ba.market.vehicles...
>
>
> > geez guys, cant you fit a windsor in there?  then you wont complain so
>much.
> > =)
> >
> > -james 'pushrod' creasy
> >
> > -----Original Message-----
> > From: Navid Kahangi <nkahangi@interwoven.com>
> > To: ba-autox@autox.team.net <ba-autox@autox.team.net>
> > Date: Tuesday, October 24, 2000 6:07 PM
> > Subject: RE: Couple of Solo II vehicles on ba.market.vehicles...
> >
> >
> > >WOW, you are getting 223 hp at the wheels?!?!?  I'm only getting 216
> > >  Give me back my Dinan cold air intake.  My car hasn't sounded so good
> > >since I took it out.
> > >
> > >--Navid
> > >
> > >>
> > >> -kit
> > >> trash talkin, no autoXin, M3 with 223 hp at the rear wheels
> > >>
> > >
> >
> >

 


<Prev in Thread] Current Thread [Next in Thread>