ba-autox
[Top] [All Lists]

RE: Couple of Solo II vehicles on ba.market.vehicles...

To: <ba-autox@autox.team.net>
Subject: RE: Couple of Solo II vehicles on ba.market.vehicles...
From: "Navid Kahangi" <nkahangi@interwoven.com>
Date: Tue, 24 Oct 2000 20:11:20 -0700
Katie?!  You are forgetting that our resident trash-talker is a former Miata
driver, now with 223 at the wheels :)

--Navid

> -----Original Message-----
> From: Jim Ochi [mailto:jochi@liquidaudio.com]
> Sent: Tuesday, October 24, 2000 7:59 PM
> To: Scot Zediker; James Creasy; navid@interwoven.com;
> ba-autox@autox.team.net
> Subject: Re: Couple of Solo II vehicles on ba.market.vehicles...
>
>
> No, please don't put more power in your Miata - power seems to do
> something
> weird to Miata drivers.  Just look at what's happening to Katie....
>
> :-)
>
> Jim
>
>
> At 07:54 PM 10/24/00 -0700, Scot Zediker wrote:
> >I can fit a 302 in my car with some work.  Problem is, it won't handle
> >anymore if I do that.  I'll probably go the F/I route if I ever decide I
> >need more power in my Miata.
> >
> >Scot
> >
> >----- Original Message -----
> >From: "James Creasy" <jcre@pacbell.net>
> >To: <navid@interwoven.com>; <ba-autox@autox.team.net>
> >Sent: Tuesday, October 24, 2000 6:26 PM
> >Subject: Re: Couple of Solo II vehicles on ba.market.vehicles...
> >
> >
> > > geez guys, cant you fit a windsor in there?  then you wont complain so
> >much.
> > > =)
> > >
> > > -james 'pushrod' creasy
> > >
> > > -----Original Message-----
> > > From: Navid Kahangi <nkahangi@interwoven.com>
> > > To: ba-autox@autox.team.net <ba-autox@autox.team.net>
> > > Date: Tuesday, October 24, 2000 6:07 PM
> > > Subject: RE: Couple of Solo II vehicles on ba.market.vehicles...
> > >
> > >
> > > >WOW, you are getting 223 hp at the wheels?!?!?  I'm only getting 216
> > > >  Give me back my Dinan cold air intake.  My car hasn't
> sounded so good
> > > >since I took it out.
> > > >
> > > >--Navid
> > > >
> > > >>
> > > >> -kit
> > > >> trash talkin, no autoXin, M3 with 223 hp at the rear wheels
> > > >>
> > > >
> > >
> > >
>


<Prev in Thread] Current Thread [Next in Thread>