autox
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Need 5/16" ID washers, about .080" thick

from [Bob Burns] [Permanent Link][Original]
To: Autox@autox.team.net
Subject: Re: Need 5/16" ID washers, about .080" thick
From: Bob Burns <bburns37@att.net>
Date: Sat, 19 Apr 2003 09:21:50 -0500 
At 08:45 AM 4/19/2003, Eric Linnhoff wrote:
>Like the subject line reads, I need some 5/16" ID washers around .080-.085"
>thick, and they need to be a pretty good grade of steel.  Anyone know where
>I can find such creatures?

Check the McMaster-Carr on-line catalog at www.mcmaster.com.

Bob...

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Partial archives at http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Need 5/16" ID washers, about .080" thick, Eric Linnhoff
Next by Date:  Re: [evolution-disc.] Need 5/16" ID washers, about .080" thick, Eric Linnhoff
Previous by Thread:  Need 5/16" ID washers, about .080" thick, Eric Linnhoff
Next by Thread:  Re: [evolution-disc.] Need 5/16" ID washers, about .080" thick, Eric Linnhoff
Indexes:  [Date] [Thread] [Top] [All Lists]