The 94-97 shop manual says .004" shave. I have a 99 shop manual at home and if
no one responds I'll look it up tonight.
Randy
> I have a '99 Miata that looks like it needs new valve seals. I'd like to
> know what's legal as far as getting a valve job and milling the head at the
> same time.
>
> Anyone know what the specs are for a '99 Miata, i.e. max. allowable for
> milling the head (I know the default for milling is 0.010" if nothing is
> specified in the shop manual [14.10.S]) and what is allowed to be done to
> valves to bring it back to spec? I have the shop manual, but can't find
> this info.
>
> Thanks,
>
> Bill Schenker
> SDR #58 CSP '99 Miata
> CalClub #36 " " "
>
> /// autox@autox.team.net mailing list
> ///
> /// To unsubscribe send a plain text message to majordomo@autox.team.net
> /// with nothing in it but
> ///
> /// unsubscribe autox
> ///
/// autox@autox.team.net mailing list
///
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe autox
///
|