autox
[Top] [All Lists]

Re: Neon wheel size

To: Jeff Blankenship <jblanken@itds.com>, Net <autox@autox.team.net>,
Subject: Re: Neon wheel size
From: "Robert M. Pickrell Jr." <brnrubr@midusa.net>
Date: Wed, 26 May 1999 14:59:30 -0500
 I saw a post from Roger Johnson who used to be on the Stock Class Advisory or
Calsification Committee (What ever it was called) I believe his response was
about this subject, but did not see who he was responding to, and deleted it.
Anyways he amde the statement that this would not be legal in SCCA Stock Class.
Again I am unsure if he was responding to our conversation/issue or not.

I am cc Roger to see.

Rob


Jeff Blankenship wrote:

> Rob Pickrell Jr. writes:
>
> > Jeff I appreciate all of your research, sound like you really know Neon's.
>
> Thanks, I try.
>
> > However, you have not answered my question. Has the SEB approved the
> > changes you say are legal?
>
> I have no idea if the SEB has ever had to worry about it.  If it were me,
> I wouldn't have even written a letter, since I don't see it as a gray area.
> I'd expect factory documentation to be sufficient to show legality.
>
> > I do not read the rules the way you are applying them.
>
> Which rule are you referring to?
>
> > If some one follows your advice will they pass a protest?
>
> You'd be hard pressed to tell that any change was made, therefore protest
> is highly unlikely.  Not because the parts aren't in plain view, but
> because its a factory configuration that rabid neon enthusiasts would
> recognize as correct.  Still, it is obscure enough that some would not
> know.  I had to do some digging before writing my post(s).
>
> > Please note that your and my opinions are meaningless in a protest
> > enviornment.
>
> Granted, if you make a change like this, it might be smart to know where
> to find the support in the documentation.  But I'd reckon you're not
> terribly likely to need it.  In ES there are lots of non-neon cars with
> drivers who don't know anything about neons, and even then the norm is
> 14", not 13".  So I wouldn't expect any controversy over showing up on 14"
> wheels.
>
> > I thought we would get more response from other Neon owners since they are
> > so many of them. I really do not have a personal interest in this car or
> > class, just curious about your interpertation of the rules. You may be
> > correct, however you may not be too.
>
> I don't think I'm interpereting very deeply.  I'll summarize everything
> you'd need to know by paraphrasing the neons.org FAQ here:
>
> '95 MY Highlines were produced with four different front brakes (two
> sizes, each with or without ABS), and three different wheels - 13X5 4-lug,
> 14X5.5 4-lug, and 14X5.5 5-lug.  The former two wheels were fitted on cars
> with the smaller brake system, the latter was fitted on cars with the larger
> brake system.  The 14X5.5" 4-lug wheel replaced the 13X5" wheel on early
> calendar year '94 Highlines with the small (9.4") front brake system.
> After August '94, the 5-lug 10.1" system with 14X5.5" wheels became an
> option on the Highline.
>
> To the best of my knowledge, it is legal to configure a '95 Highline to
> match any one of these production configurations, because it doesn't cross
> a model year, model, or option package boundary.
>
> I didn't mention it before, but I actually bought a set of original 14X5.5"
> 4 lug steels (with 195/60 R1s on them) from one '95 owner (Ed Yourkovich)
> in West Virginia, kept the tires, and sold the wheels to a different '95
> owner (Rex Scates) in California.
>
> Sorry, all, I wasn't going to ramble on like this, but I felt you deserved
> an answer, one that you could tr...umm, scratch that, trust no one...  ;^)
> --
> Jeffrey "I want to believe" Blankenship        Senior Technical Consultant
> jblanken@itds.com                              ITDS - TRIS
> neon enthusiast #478                           Champaign, IL, USA


<Prev in Thread] Current Thread [Next in Thread>