Contact Bill Cardell at Dealer Alternative. www.dlralt.com
Either him or any of the sales people can get you a 1" front bar for
$100.
BTW, bars for the M1 will fit the 99, there are two issues. First, the
99 has the endlink brackets about 90 degrees from the M1, so you'll have
to use Heim-jointed endlinks... (dunno if that is legal in stock,
suspect that the answer is no) Second, the M2 has L shaped, instead of U
shaped endlink brackets, which may or may not be more prone to failure
than the M1... (I've heard of people shearing off the M1 brackets)
The bar from DA is 1", I have it on mine, and it works nicely.
Konis, from what I've heard, will be available later this spring, but no
definite date, yet, leaving us only the Mazdaspeed shocks, which I've
heard are too soft, and no robust enough. I haven't used them,
personally. People have said that they're better than the stock
Bilsteins on the sport package, though. They run around $160 a piece,
and are fully adjustable. Moss Motors carries them, as well as R speed.
-Kit
99 Miata
|