Hi Lauri,
Since the Holbay manifold was used on the Arrow body Alpine, the carbs will
actually point downward when installed on a Series Alpine. It has straight
runners and, on a lefthand drive Alpine, it difficult to use because of the
brake master cylinder. I have one that was cut and rewelded to provide a 5 deg
upward angle for the carbs. I was using a Wilwood master cylinder and it
barely fit. I removed and reinstalled the engine and it would no longer fit.
The real interference point was the steering box. I made some spacers to go
under the motor and transmission mounts to lift the engine slightly and it
still wouldn't fit. I ended up getting the Redline manifold intended for the
Series Alpine and having the intake runners welded up to match the Holbay head.
You can see some pictures of when it did fit at
http://www.tomhill.freeservers.com/photo4.html
Tom Hill
-------------- Original message from ?auri Lehtinen
<lehtinen.lauri@kolumbus.fi>: --------------
> Hello, folks,
> has anyone a photo of a Holbay manifold for dual webers?
> Is it bent so that carbs rise a bit higher?
> And how brake master cylinder is arranged?
>
> Lauri
>
> ?auri Lehtinen
> toimittaja, insinoori
> Asemapaallikonkatu 12B
> Helsinki, Finland
> +358 (0) 400 851988
>
>
>
>
>
>
> Spyware Doctor-ohjelma on tarkistanut sdhkvpostiviestit (6.0.0.386)
> Tietokantaversio: 5.11840
> http://www.pctools.com/fi/spyware-doctor-antivirus/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Alpines@autox.team.net
> http://autox.team.net/mailman/listinfo/alpines
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines
http://www.team.net/archive
|