RE: Ignition problems - I think

["Bill Tubbs" <piperbill@isp01.net>]

This is important.  I did the exact same thing a few weeks ago and a trip to
a local mechanic found that I had the wires 180 degrees out.  Fired right up
after that.

Bill

-----Original Message-----
From: owner-alpines@autox.team.net
[mailto:owner-alpines@autox.team.net]On Behalf Of jumpinjan
Sent: Tuesday, August 20, 2002 9:08 PM
To: Chris Mottram
Cc: alpines@autox.team.net
Subject: Re: Ignition problems - I think


Chris,
        To get the engine timed with #1 cylinder firing, you need to remove the
valve cover and watch the valve movement. The rotor turns
counterclockwise and firing order is 1-3-4-2. The points are set to
0.016".
Jan
--
   ______  ______  _______
  / ____/ / ____/ / ___  /
 / /___  / /___  / /__/ /   _|  _   _  .  _   _   _
/___  / /___  / / __  _/   (_|_(/_ /_)_|_(_|_| )_/_)
___/ / ____/ / / /  \ \                   _|
____/ /_____/ /_/    \_\http://www.ssrdesigns.com