I believe Speedy Spares in England has some remanufatured early suspension
parts.
----- Original Message -----
From: Bob Douglas <b_s_d@ureach.com>
To: <GSTROM99@aol.com>; <alpines@autox.team.net>
Sent: Thursday, June 13, 2002 2:47 PM
Subject: Re: Series II upper fulcrum kits
> Tiger Tom once suggested sticking the front
> suspension/crossmember from a later Series under our SII as a
> way to avoid being stuck by the looming unavailability of key
> components on the early suspensions. Has anyone on the list
> done this? If so, any comments on how it worked out?
>
> Regards, Bob Douglas
>
>
> ________________________________________________
> Get your own "800" number
> Voicemail, fax, email, and a lot more
> http://www.ureach.com/reg/tag
>
>
> ---- On Wed, 12 Jun 2002, GSTROM99@aol.com (GSTROM99@aol.com)
> wrote:
>
> > My Series II left upper control arm bushings are shot. These
> are the
> > steel/threaded type. I replaced the right side about a year
> ago (after
> > buying Kurt's "last one"). I called S/S and find they too
> are out and "no
> > longer available".
|