Chuck,
I've just completed restoring my S1 steering wheel and hub. The wheel is not
installed yet so I can get those dimensions for you tomorrow when I'm at the
garage. I'll use verniers to be as accurate as possible.
Tim Stiffy
S1
----- Original Message -----
From: chuck nicodemus <armorseal@spiretech.com>
To: Scott Donnelly <oharajem@free.midcoast.com>
Cc: Stu Brennan <stubrennan@mediaone.net>; Alpine list
<alpines@autox.team.net>
Sent: Wednesday, August 15, 2001 8:32 AM
Subject: Re: Steering wheel
> While the thought is on these darn round things . My Ser ll , has been
modified ,
> the DPO has filled the holes for the screws to be acessed to remove the
wheel . What
> is the diameter of the screw head ? And how deep is the hub to the screw
head . I
> want tto remove the wheel to fix the HORN...I do know there are three
screws and are
> set in a three set. One on the top /or bottom and the other two are on the
opiset
> side. Then how far from the bar on the radius is the first on the two
side? Whew.
> Thanks
> chuck
|