Hi Bob- The only way to be sure is to put your points back in for a test. I
had a similar problem with one of my Tigers and it turned out to be the
Ignitor module. All in all I've had very good luck using Ignitors over the
last 4 years.-- Ed
Cool Cat Eddie ,1 S3 GT,3 S4's, 2 S5's, 2 MK1 Tigers
Deep South Rep TE/AE
----- Original Message -----
From: "Bob Hamilton" <hamilton@accesswave.ca>
To: "Ed Esslinger" <eee1@snowhill.com>; <tigers@autox.team.net>;
"alpines-list" <alpines@autox.team.net>
Sent: Sunday, November 05, 2000 5:02 PM
Subject: Re: Problem with my Ignitor
> Eddie,
>
> Thanks for the tip as I was having the same problem with the
> Ignitor installed in my Sunbeam Talbot Alpine but the misfiring two
> cylinders would start to fire after about a half minute. I also was
> suspecting an antifreeze leak into the cylinders but will now check the
> magnetic ring.
>
> Regards,
> Bob
>
> Robert (Bob) A.C. Hamilton, Waverley, Nova Scotia, Canada
> The Man of Many Sunbeams - Alpine, Drophead and Saloon 1953-1954
> [Stable mates - 1973 Midget and 1968 M-B 280SE]
> Home Page: www.navnet.net/~hamilton
> BATANS Home Page: www.batans.ns.ca
> E-Mail: hamilton@accesswave.ca
> =========================================================
|