There are four pins on the Alpine script from my SIV.
1. At the left side of the 'A' at the intersection of the vertical and
horizontal strokes (about 3/4 inch from the left)
2. Near the top of the 'A' (about 1/4 inch to the left of the top)
3. At the center of the vertical stroke of the 'p'
4. At the bottom of the 'e'
You'll notice that pins 1, 3, and 4 lie in a straight line along the major
horizontal line that makes up the script.
If you or someone else would like to post a picture on a website, let me
know and I'll send a digital picture.
Brad Sahr
'64 Series IV Automatic
----- Original Message -----
From: <CANISDOG@aol.com>
To: <phillip@sprules.co.za>; <alpines@autox.team.net>
Sent: Monday, July 17, 2000 6:51 AM
Subject: Re: Ok, I give up....
> Phillip,
> These "scripts" are an interference friction fit brought about by small
> inserts in the holes that they are in. All you need to do is pry them
away
> from the body making sur to do it evenly.
> I don't recall where the little studs are but they are NOT at the very
ends.
> Someone on the list can probably tell you where those lie so you can pry
them
> at those points and avoid bending or breaking them.
>
> Paul
> Colorado
|