On my series 3 the front brackets are quite different from the rears.
Incidentally, when re-fitting my rears I used rubbers from shock absorber
mountings to go between the mounting point and the brackets. I also had to
re-bend the brackets to get a satisfactory bumper fit.
Vic Hughes
Jay_Laifman@countrywide.com wrote:
> I've got a big jaw. And, for good or bad, I'm willing to stick it out to
> be hit from time to time. A couple people have told me that the bumper
> brackets are not the same front and back, only the bumpers. All I know is
> from observation. I have the bumpers and bumper brackets from two SV's,
> and one SIV. Try as I might, I sure as heck couldn't see a difference
> between them, except the angle for driver side/passenger side I mentioned.
> I'll look again though.
>
> Jay
|