alpines
[Top] [All Lists]

Re: Fitting Dash Tops

To: Christopher.Albers@bubbs.biola.edu
Subject: Re: Fitting Dash Tops
From: Jay_Laifman@countrywide.com
Date: Tue, 16 May 2000 07:49:03 -0700
>I was fortunate enough to have the originals.  They are simply
>aluminium pieces covered with black canvas, like soft top material.
>That's exactly what I used, just contact cemented the stuff on.  Looks
>real good, and original, too, Jay!  =-p

Actually, I had those two side pieces too.  On the cars I've seen at least,
those two side pieces are about 6-7" long, but then there were about 3 feet
long of black pressboard in between those two side pieces - like right
above where the heater controls are and along that area.  The little cubby
hole light mounted through those center pieces too.

Jay


<Prev in Thread] Current Thread [Next in Thread>