I now own Peter's car (it's a beauty) and unfortunately that's one of the bits
that he did not include with the car! :)
Cheers,
Dave
On 2012-05-15, at 2:56 PM, David Friedlander <forzion7@gmail.com> wrote:
> Greetings all!
>
> I see on http://www.vtr.org/maintain/trunnion-oil.shtml
> that Peter Zaborski uses a Quicksilver Grease Gun (P/N
> C-91-37299 and oil is Quicksilver Gear Lube Super Duty
> in a 250 ml tube (P/N 92-98780). That's good info for
> trunnion oiling.
>
> But, can someone recommend a good quality grease gun
> for tie rods, u-joints, ball joints, etc. that is able to reach
> grease zerks while lying on ones back on the floor of a
> garage? :- ) The grease gun I have must be a cheapo -- it
> leaks and is too large to maneuver where it's needed....
>
> Thanks!
>
> Dave
> '74-Six CF25194UO
>
> ________________________________________
>
> 6pack@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/6pack/tr6@lbcs.ca
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/6pack/mharc@autox.team.net
|