I see. Does it look something like this?
http://www.northerntool.com/shop/tools/product_200361819_200361819
Dave
On Tue, May 15, 2012 at 7:28 PM, <grego@sandesco.com> wrote:
> I have a Lincoln pneumatic grease gun.
> It comes with a long flexible hose to the nozzle, like the one in your
> link, but longer.
> I don't have issues with it leaking.
> I got it because I have a farm with several tractors and do a LOT of
> greasing, like every weekend. The hand lever guns were killing me!
>
> The great thing about this Lincoln is the trigger is easy to pull and
> leaves your other hand free to lock (and sometimes hold) the nozzle down on
> the zerk fitting.
> The hose is flexible enough to get into tight places and stiff enough to
> shove on to recessed fittings (man I hate those).
>
> The other great thing is that it has the power to blow through most stuck
> fittings.
>
> the quality is outstanding. I have had no issues and have dropped it a
> couple of times with not even a scratch.
> The pull back latch is easy to engage and very positive.
>
> You will fall in love with it and wonder why it took you so long to get
> it. Kind of like your first air ratchet.
> You will also end up greasing things more often, just to use it. That's a
> good thing.
>
> They make a battery powered one, if you don't have a compressor. But hey,
> if you don't have a compressor then shame on you! Buy one just so you can
> use the grease gun.
>
> -grego
>
> -----Original Message-----
> *From:* David Friedlander [mailto:forzion7@gmail.com]
> **
> can someone recommend a good quality grease gun for tie rods, u-joints,
> ball joints, etc. that is able to reach grease zerks while lying on ones
> back on the floor of a garage? :- )
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/6pack/mharc@autox.team.net
|