6pack
[Top] [All Lists]

Re: [6pack] Ruining rheostats

To: "John Mitchell" <jmitch@snet.net>
Subject: Re: [6pack] Ruining rheostats
From: "Navarrette, Vance" <vance.navarrette@intel.com>
Date: Mon, 12 May 2008 07:30:47 -0700
        John:

        If you did not already know this, the Lucas fuses are rated
differently than US made fuses. The British use the DIN standard
(German) while US fuses use the UL (Underwriter's Laboratory) standard.
British fuses must be derated by 40-50% to get an equivalent UL rating.
So the Lucas fuse is roughly a 17-20 amp US fuse. So your 10 amp fuse
should let go first, as you have stated.

                Vance


    Vance Navarrette
    Cogito Ergo Zoom
    I think, therefore I go fast

-----Original Message-----
From: 6pack-bounces+vance.navarrette=intel.com@autox.team.net
[mailto:6pack-bounces+vance.navarrette=intel.com@autox.team.net] On
Behalf Of John Mitchell
Sent: Saturday, May 10, 2008 3:39 AM
To: 6 Pack; triumphs@autox.team.net
Subject: [6pack] Ruining rheostats

   Thanks again to all that helped on this one.  I never did find
exactly what the cause was(is), but I noted that gauge lights for the
speedometer were stretched pretty tight, so I rerouted those.  I decided

to leave the rheostat jumper in place for now, but added an inline fuse
that I can get to easily.  Hopefully if the short re-occurs( and you
know it will), that fuse will let go and all I'll lose is my gauge
lights and not my taillights.  I used a 10 amp acg for the inline which
should go before the 35 amp Lucas.   John Mitchell  76 TR6
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>