Hi and happy new year.
As part of my conversion to Webers I will no longer be using the water circuit
through that carbs and this will free up that port on the water pump housing.
I could block it with a brass plug or I could screw in another water temp
sender unit and have it there as a spare but I was also wondering if I could
use this port for an Electric fan temp switch ?. I like the electric fan idea
but I'm not thrilled with the switch arrangements that I have seen so far
(attach to radiator fins, T adapter in top hose etc). Are there fan switches
that would fit and work in this port ?
Another question.. do all electric fans need a relay or is it just the ones
with high current demands ?. If I go down this path it will be a puller fan
used to replace the mechanical fan so it would be a 16 inch model and I see
some of these are rated in excess of 16 amps.
Stan
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|