interesting. we use non-acetone nail polish remover to clean PCs. perhaps
this might work.
Lfm614@aol.com wrote: I have used acetone successfully but you have to be very
careful.
Use a clean soft cloth like from an old t-shirt. Put acetone on cloth and
wipe the lens carefully, do not get carried away as the acetone will dissolve
the plastic and leave streaks. A little bit at a time works well. I would
practice on an old lens or the bottom or side first where you can't see it if
you go to far. It will take the yellowing off. After you take the yellow
off, you can polish with clear coat compound and wax if you like.
You buy a can of acetone at most hardware stores.
Lou
|