In a message dated 11/6/2006 10:35:17 P.M. Eastern Standard Time,
johncnorth@gmail.com writes:
have been looking at these. The cheaper ones look like they have
four adjustable arms that I assume bolt to the motor. Are these type
satisfactory? They are rated between 750 and 2000#, and the smallest
is less than $50.
John-
another thing to think about if you're putting a TR6 engine on a stand - if
you plan on rolling the stand around at all, while the engine is on it - get
one with 4 wheels - not the 3 wheeled T-shaped base, because, while the
weight rating may be adequate, it will be unstable while rolling because the 6
block is as long as it is.
Cheers,
Jack Mc
|