Re: Triumphtune valve cover

[RICK ORTHEN <peketzu@verizon.net>]

Jim,
   
  Sounds like you got a badly made repro; I bought my NOS Triumphtune cover on 
ebaY a few years back and it was in excellent condition.  You will need to make 
your own cork gasket as the stock one is too thick and is very difficult to 
position (the Triumphtune cover flange is completely flat) for no leaks.  Also, 
there is no baffle on the inlet side of the cover vent tube as there is on the 
stock cover, so you'll get more oil mist giong to the carbs.
   
  Rick O.
  72 TR6