Jim,
I'll bet it spews oil out around the filler cap. My Triumphtune valve cover,
purchased a few years ago, apparently was a little more finished when it
arrived but it was always wet with oil around the filler cap.
On the original Triumph valve cover the fill cap is not vented so the vent
(which is improperly done on the Triumphtune) can be plugged. I used a drop
of solder and my valve cover is now clean.
Rick
http://sidedrafttbi.com/
> -----Original Message-----
> From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net]On
> Behalf Of Jim Jones
> Sent: Sunday, July 23, 2006 11:56 PM
> To: 6pack@autox.team.net
> Subject: Triumphtune valve cover
snip
>
> By the way, it there anything I should know about alloy covers in
> general? Any quirks or problems to watch out for?
|