I found that it wasn't necessary to use a sealent.
After installing the windscreen, I just used a sharp blade to cut the gasket
off flush with the body.
Al Salvatore
www.triumphowners.com/624
----- Original Message -----
From: "Tony and Debbie Pepe" <ajpepe@sbcglobal.net>
To: <6pack@autox.team.net>
Sent: Tuesday, November 29, 2005 8:01 AM
Subject: Windscreen Seal
> Question for the group.
>
> I am in the process of installing the seal between the windscreen and the
> body
> on my 74 TR6 and have two questions fro the group.
>
> First, is there a sealing compound that should be applied between the seal
> and
> the windscreen and the seal and the body?
>
> The second is regarding the windscreen seal itself. The seal is longer
> than
> the windscreen and does not have finished ends. How should the seal be
> trimmed in relation to the windscreen so the ends seal well and look like
> the
> factory seal ?
>
> Thanks in advance.
>
> Tony
|