On my drivers side i used a threaded brass bushing that already had a hole
about the same size of the shaft. i BARELY reamed out the hole in the firewall
and it threaded right in from the engine compartment side. I screwed a brass
cap on the other side by your feet just in case the bushing might back out some
day, it had a hole for the shaft already also premade. I used a large flat
washer on the in and outside also. Works excellent and no squeaks. Bought the
fitting at lowes for a few bucks.
On the passenger side i used the regular bushing, it popped right in can't
remember if i reamed the hole a tad or not but it's plenty tight.
hope that made sense
--
_______________________________________________
Surf the Web in a faster, safer and easier way:
Download Opera 8 at http://www.opera.com
|