John,
This may not be the reason, but the dizzy gear and cam gear do not have
striaght teeth. So you have to turn the dizzy gear as you pull up. Trying to
pull the gear straight up will be fruitless. I jam a finger into the center
hole to provide the necessary torque and pull.
Greg Dito
CD6250L
>
> -----Original Message-----
> From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
> Behalf Of John Mitchell
>
> Second, the distributor drive gear is in 180 degress off, but I cant
> seem to get it out to turn it. Is this because of the new cam being
> tight and should I just run with the wires moved halfway around the cap
> for a while.
>
> Thanks for all your help. John Mitchell
|