Bill. Ive been there. They are a bitch(steel adjuster threaded into an
aluminum housing) I had to remove the adjusters and put them in a
vice. It took a couple days of Kroil and heat and they finally came
loose.. I cleaned all the parts and reassembled with lots of anti-seize.
Sorry, dont think theres an easier way except buying new ones and
they're expensive. Hope that helps. John Mitchell 76 TR6
Bill & Skip Pugh wrote:
> The rear brake adjuster (passenger side) on the TR6 is "frozen" I
> can't get it to turn in either direction, I am assuming I have to
> remove the brake drum and try to free up what ever is causing the
> jam. Is there any short cut that might help??
>
> Thanks again for the Help
|