6pack
[Top] [All Lists]

Re: clutch fork pins

To: JIMMY RICHARDS <andr.jrsquared@verizon.net>
Subject: Re: clutch fork pins
From: Mitchel Seff <ms6453@optonline.net>
Date: Fri, 03 Oct 2003 07:04:42 -0400
Jimmy,

Some like to file a flat on the pins, I have always installed them the 
way they came out of the package. The belief is by filing a flat you 
give the fork a more stable contact surface but I think if you file 
unevenly you can create a slight torqueing to the fork/bearing carrier. 
The usage of the clutch will bring a natural seating to the fork pins. 
The Bentley manual mentions nothing about preparing the fork pin either

-- 
Mitch Seff
Oceanside, N.Y.
75 TR6
http://www.angelfire.com/ny4/triumph5/ 




<Prev in Thread] Current Thread [Next in Thread>