did Joe provide you with the linkage set up?
I have had a pair of HS6's sitting on the bench for a year. No linkage kit.
thanks
Al
----- Original Message -----
From: "Terry Geiger" <twgeiger@hiwaay.net>
To: "michael lunsford" <mblunsfordsr@yahoo.com>
Cc: <6pack@autox.team.net>
Sent: Wednesday, January 08, 2003 11:07 AM
Subject: Re: SU Carbs on TR 6
> Micheal,
>
> I ran a set of SU's on my TR6 for about six months and was quite pleased
with
> them overall.
>
> Mine were HS6's that came from a Volvo. Joe Curto provided the correct
> jets/needle combination for the TR6. Also, due to the angle that the
carbs
> set on a TR6 engine (almost level) you must use the MGC fuel bowl to get
the
> correct fuel level.
>
> I'd contact Joe Curto as he is the SU guru in the US. If you provide him
with
> the needle/jet combination you're using he should be able to help you out.
No
> financial interest in Joe Curto, just a satisfied customer.
>
> http://www.joecurtoinc.com/
>
>
> Terry Geiger
> Florence, Alabama USA
> 1974 TR6 Mimosa Yellow
|