Two topics/questions:
1. I got the stiff springs, have removed the bump stop, have one
rebuilt rear hub, but not the other. Have put on the sticky Kuhmo's
[but not run it yet] -- now I'm worried about hub failure. Am planning
to put in the Nissan 300Z diff next winter. Does anyone have practical
experience with installing the rest of the Nissan [240/260/280/300??]
rear -- meaning the axels as well as the diff? Bob Lang, I know you
have the corvairs, Mike Munson, what do you run? IF I decide to do
Corvairs, where can I get info on what parts to source [and will I still
be able to use my brand new 16x7 Panasports [with the TR6 4 bolt/4.5"
spacing]?
2. Now that I have 205-45/16's all the way round, the front sticks up
too high. I just installed the tt4207 450lb 6.0 inch front springs
which brought down an inch, but the front is still 1" higher than the
rear [which already has stiff short springs]. I like to lower the frame
-- how did you do that Bob? Anybody else have any ideas/warnings?
Thanks in advance,
Chuck Arnold
[demime 0.97c removed an attachment of type text/x-vcard which had a name of
Chuck.Arnold.vcf]
|