Thanks Dave. I'll try this out. What's the downside of disabling the bypass
valve?
- Hugh
> -----Original Message-----
> From: Dave Massey [mailto:105671.471@compuserve.com]
> Sent: Tuesday, June 04, 2002 10:06 AM
> To: Hugh Fader
> Cc: 'triumphs'; '6pack'
> Subject: Way too much flow thru front carb
>
>
> Message text written by Hugh Fader
> >My guess is that the air bypass valve on the front requires
> adjusting. On
> my
> carbs the adjustment hole seems to be potted closed. I
> removed the valve
> and
> it looks like it could be adjusted. Should I try? If so, how?
> Can I drill
> through the potting so it can be adjusted on the outside?
> <
>
> Hugh, as a diagnostic you can cut a gasket that will block
> off the ports
> for this valve and install it under the valve. This will
> tell you if it is
> the valve or not. If that fixes it you could just leave it in place.
>
> Dave
|