| To: | 6pack@autox.team.net |
|---|---|
| Subject: | Re: Clutch master cylinder |
| From: | Btp44@aol.com |
| Date: | Mon, 22 Oct 2001 19:15:45 EDT |
Tim-The bore of the clutch master cyl. was reduced to .700" in 1970 to reduce the pedal pressure required to operate the clutch, which it did by 13%. Unfortunately, it also reduced the stroke of the slave cyl. I changed to the .75" master cyl out of frustration to cure a release problem and never regretted it. Berry Price |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Clutch master cylinder, Timothy Holbrook |
|---|---|
| Next by Date: | Re: Engine Compression in a TR6, Jim Henningsen |
| Previous by Thread: | Clutch master cylinder, Timothy Holbrook |
| Next by Thread: | Re: Clutch master cylinder, Nelson Riedel |
| Indexes: | [Date] [Thread] [Top] [All Lists] |