Hi Todd,
I also have a 250 and needed the banjo pipe. I got a used one from
someone on the list, but it broke when I tried to straighten it out.
I then shipped it to a place who creates tubes in stainless steel. They
re-created the piece and it looks great. The company is Classic Tube in
Lancaster, NY. I spoke with Mark Brinner at 800-882-3711. I believe
that he may have kept a template of my banjo and may be able to make one
without your sending your old unit. Sorry, but I don't remember the cost.
I believe the PVC is threaded into the manifold. These are very hard to
remove as they consist of a bimetallic joint that is a bear to separate.
Good luck,
Peter
TR250
>Hi,
>
>My TR250 has a "plug" where the PCV valve was. I attempted to unscrew the
>plug thinking it was threaded, but there were no threads. It just pulled
>out. Are there supposed to be threads in that "hole" for the PCV valve?
>I'm also looking for the banjo connector for the metal vacuum lines as mine
>is filled in with lead.
>
>Thanks,
>
>Todd
>
>_________________________________________________________________
________________________________________________________________________
Peter Macholdt
(609) 466-6458
117 West Prospect Street
Hopewell, New Jersey 08525
|