| To: | 6pack@autox.team.net |
|---|---|
| Subject: | Re: Rear Hub End Play and the Factory Service Manual |
| From: | Btp44@aol.com |
| Date: | Wed, 28 Feb 2001 01:33:00 EST |
Joe-Yes, you can remove excessive end play without disassembling and replacing the collapsible spacer. Just make sure that the end play is not reduced below the.002"-.004" spec. If this happens, then the spacer will have to be replaced, as loosening the adjustment will not restore the end play. The end play is not controlled by the nut on the outside of the hub, but by the bearing adjustment nut. It is shown on page 213 #21 in TRF's big blue catalog. Berry |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Rear Hub End Play and the Factory Service Manual, J Garruba |
|---|---|
| Next by Date: | With or without speaker holes, corey.sherman |
| Previous by Thread: | Rear Hub End Play and the Factory Service Manual, J Garruba |
| Next by Thread: | With or without speaker holes, corey.sherman |
| Indexes: | [Date] [Thread] [Top] [All Lists] |