To everyone that replied.
Thanks for all the great ideas, I have not tried the rope down the plug
before, sounds a good one.
It's to late to try starting it, totally stripped everything from the
engine.
Heating may work but I cannot lay my hands on any Oxy gear.
At the weekend I will try all the suggestions and post the outcome.
All The Best
Mike :o))
2000mk2@mytriumphs.fslife.co.uk
> Help!!
>The other day a valve spring broke. So I >went to the spares box found a
good
>spring and got busy removing the rocker >cover, tappets etc, all went well
until it came to lifting off the head. solid!!!
I put plusgas down the studs, solid!!!
I put double lock nuts on to remove the studs Solid!!!
I used a special tool that unscrews anything Solid !!!
I tried a chisel on the joint, broke chisel. Solid !!!
I have been told about welding on a nut but it seems 9 of the 14 are stuck
I have been told, get a club hammer and smash it to bits then replace it
with another.
Any ideas of a less drastic nature please.
All The Best
Mike :o))
///
/// 2000-register@autox.team.net mailing list
///
|