Help!!
The other day a valve spring broke. So I went to the spares box found a good
spring and got busy removing the rocker cover, tappets etc, all went well
until it came to lifting off the head. solid!!!
I put plusgas down the studs, solid!!!
I put double lock nuts on to remove the studs Solid!!!
I used a special tool that unscrews anything Solid !!!
I tried a chisel on the joint, broke chisel. Solid !!!
I have been told about welding on a nut but it seems 9 of the 14 are stuck
I have been told, get a club hammer and smash it to bits then replace it
with another.
Any ideas of a less drastic nature please.
All The Best
Mike :o))
///
/// 2000-register@autox.team.net mailing list
///
|