<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.23562">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>Hi Rodger, I have the wiring harness business in 
Australia and a couple of Magnettes so I may be able to assist your trouble 
shooting.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I assume your car is fitted with the Lucas DB10 
relay box and your rear signal lights operate as stop lights and turn 
signals.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>The first thing I would do is disconnect the wires 
to the stator tube. The wires may have become twisted and shorted. If the 
condition persists then you know it is not caused by the stator tube wire or the 
flasher switch. If the condition goes away, remove and chek the stator tube 
wiring and switch connections.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I would also check the connections to the roof 
harness behind the dash. Make sure the wires are connected colour for colour - 
white purple and white brown for the two  rear signal lamps and brown green 
for the interior light. Again, you can disconnect these and see if the problem 
persists by checking the front flashers.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>And the other thing to check is the DB10 relay box. 
</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>On terminal one you should have a green with brown 
wire which comes from "L" on the flasher can.</FONT></DIV>
<DIV><FONT size=2 face=Arial>Terminal 2 should be a green with white wire for 
your front right flasher</FONT></DIV>
<DIV><FONT size=2 face=Arial>Terminal 3 should be a white with brown wire for 
the right rear signal lamp (brake and flasher combined)</FONT></DIV>
<DIV><FONT size=2 face=Arial>Terminal 4 should be a green with yellow 
 wire from your stator tube to turn on the right turn flashers</FONT></DIV>
<DIV><FONT size=2 face=Arial>Terminal 5 should be a green with purple wire and 
is the input from the stop lights switch</FONT></DIV>
<DIV><FONT size=2 face=Arial>Terminal 6 should be a green with red 
 wire and is for the front left flasher</FONT></DIV>
<DIV><FONT size=2 face=Arial>Terminal 7 should be a white with purple wire and 
is for the leaft rear signal lamp</FONT></DIV>
<DIV><FONT size=2 face=Arial>Terminal 8 should be a green with blue wire and is 
from your stator tube to turn on the left turn flashers.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>These are the standard Lucas colour codes. If all 
this is wired correctly, and your problem still persists, I would disconnect the 
wires on terminals four and 8 and see if the condition goes away. If it doeasn. 
I would suggest the DB10 box is faulty.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Let me know how you get on.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Paul Vermont</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>----- Original Message ----- </DIV>
<BLOCKQUOTE 
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
  <DIV 
  style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> 
  <A title=gopherdad@aol.com href="mailto:gopherdad@aol.com">Rodger Shaver</A> 
  </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A title=zmagnette@autox.team.net 
  href="mailto:zmagnette@autox.team.net">zmagnette@autox.team.net</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, February 18, 2014 3:06 
  AM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> [Zmagnette] Wiring problem</DIV>
  <DIV><BR></DIV><FONT color=black size=3 face="Arial, Helvetica, sans-serif">
  <DIV><FONT style="BACKGROUND-COLOR: transparent" 
  face="Arial, Helvetica, sans-serif">I have been frustrated with a glitch with 
  my re-wiring job.  This is a 59 ZB with a new British Wiring harness. 
  Regulator is the original, as are horn and signal light relays. New flasher 
  unit form Moss. Re-wired stator tube.  Most electrical functions seem 
  correct, e.g. the heater fan motor, the ignition, headlights.  However, 
  when I turn on the key all four signal lights flash, along with the dome 
  light. I have checked connections to dash panel and relays and can't find a 
  problem. I have had trouble confirming green wire continuity from fuse box to 
  all connections. Finally, I have four green wires at the fuse box, not 
  the three illustrated on the ZA diagram I have in my WSM.  </FONT></DIV>
  <DIV> </DIV>
  <DIV>I need advice on how to troubleshoot this problem, everything I check 
  seems ok or doesn't make any sense. Rodger </DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV 
  style="FONT-FAMILY: arial,helvetica; COLOR: black; FONT-SIZE: 10pt">-----Original 
  Message-----<BR>From: Steve Kirby <skirby210@cox.net><BR>To: List for 
  the Z Magnette Group - North America <zmagnette@autox.team.net><BR>Sent: 
  Sun, Feb 16, 2014 8:40 pm<BR>Subject: Re: [Zmagnette] Z Magnette Wiring 
  Diagram<BR><BR>
  <DIV id=AOLMsgPart_2_154e9e13-90e2-4041-9c92-b18144d41a91>
  <DIV class=aolReplacedBody bgcolor="#ffffff">
  <DIV>Thanks John, this is huge undertaking, and I know we are all very 
  appreciative of your efforts!</DIV>
  <DIV> </DIV>
  <DIV>#2SteveK</DIV>
  <BLOCKQUOTE 
  style="BORDER-LEFT: rgb(0,0,0) 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
    <DIV 
    style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal">----- 
    Original Message ----- </DIV>
    <DIV 
    style="FONT: 10pt arial; BACKGROUND: rgb(228,228,228); font-size-adjust: none; font-stretch: normal; font-color: black"><B>From:</B> 
    <A title=zamagnette@charter.net href="mailto:zamagnette@charter.net">John 
    Perkins</A> </DIV>
    <DIV 
    style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>To:</B> 
    <A title=zmagnette@autox.team.net 
    href="mailto:zmagnette@autox.team.net">zmagnette@autox.team.net</A> </DIV>
    <DIV 
    style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>Sent:</B> 
    Sunday, February 16, 2014 1:51 PM</DIV>
    <DIV 
    style="FONT: 10pt arial; font-size-adjust: none; font-stretch: normal"><B>Subject:</B> 
    [Zmagnette] Z Magnette Wiring Diagram</DIV>
    <DIV><BR></DIV>No, I haven't fallen off the face of the earth.  Family 
    and Employer <BR>have conspired to keep me from spending as much time on the 
    wiring <BR>diagram as I had hoped.  Also, building a set of icons to 
    use for the <BR>various components has taken more time than I thought.  
    The news is that <BR>I've completed building a single wiring diagram that 
    has all of the <BR>options for the ZA, ZB, ZB Varitone both RHD and 
    LHD.  It is being <BR>checked for accuracy and completeness so it 
    should be ready to send out <BR>soon.<BR>     
    Perkins<BR>_______________________________________________<BR>Zmagnette 
    mailing list<BR><BR>Donate: <A href="http://www.team.net/donate.html" 
    target=_blank>http://www.team.net/donate.html</A><BR>Archive: <A 
    href="http://www.team.net/archive" 
    target=_blank>http://www.team.net/archive</A><BR>Forums: <A 
    href="http://www.team.net/forums" 
    target=_blank>http://www.team.net/forums</A><BR>Unsubscribe/Manage: <A 
    href="http://autox.team.net/mailman/options/zmagnette/skirby210@cox.net" 
    target=_blank>http://autox.team.net/mailman/options/zmagnette/skirby210@cox.net</A><BR></BLOCKQUOTE></DIV>
  <DIV 
  style="BACKGROUND-COLOR: rgb(255,255,255); MARGIN: 0px; FONT-FAMILY: Tahoma, Verdana, Arial, Sans-Serif; COLOR: rgb(0,0,0); FONT-SIZE: 12px" 
  id=AOLMsgPart_3_154e9e13-90e2-4041-9c92-b18144d41a91><PRE style="FONT-SIZE: 9pt"><TT>_______________________________________________
Zmagnette mailing list

Donate: <A href="http://www.team.net/donate.html" target=_blank>http://www.team.net/donate.html</A>
Archive: <A href="http://www.team.net/archive" target=_blank>http://www.team.net/archive</A>
Forums: <A href="http://www.team.net/forums" target=_blank>http://www.team.net/forums</A>
Unsubscribe/Manage: <A href="http://autox.team.net/mailman/options/zmagnette/gopherdad@aol.com" target=_blank>http://autox.team.net/mailman/options/zmagnette/gopherdad@aol.com</A>

</TT></PRE></DIV><!-- end of AOLMsgPart_3_154e9e13-90e2-4041-9c92-b18144d41a91 --></DIV></DIV></FONT>
  <P>
  <HR>

  <P></P>_______________________________________________<BR>Zmagnette mailing 
  list<BR><BR>Donate: http://www.team.net/donate.html<BR>Archive: 
  http://www.team.net/archive<BR>Forums: 
  http://www.team.net/forums<BR>Unsubscribe/Manage: 
  http://autox.team.net/mailman/options/zmagnette/paul@vinwire.com.au<BR><BR></BLOCKQUOTE></BODY></HTML>