[Zmagnette] Wire Wheels(again Sorry)

[Mike Hickman]

Thanks Allen,
All is well, you are on the Ball as always.

Thanks,
Mike H.


On Sat, Jan 18, 2014 at 6:42 PM, Allen Bachelder <bachldrs at comcast.net>wrote:

> Hi all,
>
> In my list administrator's role, I just received the following note from
> Mike Hickman intended for the list. Mike, apparently I neglected to change
> your email address on the list correctly (' thought I did do it, but alas,
> no).  ' Think all is OK now - I'll rely on Mike to tell me if his list
> access is working as it should.
>
> Meanwhile, please direct your attention to Mike's message below.
>
> Thanks!
> Allen
> ******************************************************************
>
> *Allen & Florrie Bachelder       =iii=<Spring Creek Home for Wayward MGs*
> *'57 ZB, '65 B, '69 C/GT, '73 B/GT*
> *North Street, MI 48049, USA*
> *http://www.mgexperience.net/member/bachldrs
> <http://www.mgexperience.net/member/bachldrs>*
> ******************************************************************
>
> *From: *Mike Hickman <mgmike62 at gmail.com>
> *Date: *January 17, 2014 3:30:23 PM EST
> *To: *zmagnette-bounces at autox.team.net
> *Subject: **Wire Wheels(again Sorry)*
>
>
> I am still trying to get these Wire wheels built for my '58 ZB Varitone on
> the tech sheet there is a measurement from the face of where you bolt the
> wheel on to the outside edge of the Caliper or Caliper Bracket whichever is
> more, this has to be 1/4" or less as I measure it  is 1/2". Dayton wants to
> know what other types of wires have been used on Magnettes, I remember from
> prior discussions here that TR 6 and MGA wheels have ben mentioned I think.
> I want to use there "Dental" system so I can use  real knock off. I am
> ready to grind off 1/4 inch from each caliper to make it fit but don't want
> to do this.
>
> Can someone Please help hee?
>
> Thanks,
> Mike H.
>
>
>
>
>
>
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/mgmike62@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20140119/765db583/attachment.html>