[WPTA] TR2-TR3 upholstery hardware

[Vic Panza]

Good morning

As you may (or may not) know, the early Triumphs used a #4 cup or flush
washer with a slotted oval head screw to attach the door cards and other
aspects of the interior. Moss does not have these and supplies a #6
phillips head screw with a #6 finish washer (that has a raised ridge around
the outer diameter).

I was buying these cup washers from a company that specializes in auto
supplies and they are no longer able to get them. I've spent hours
searching the internet and speaking with various distributors and it seems
that the only way to get new ones is to have them made.

I have been able to clean up some old used parts, but need additional
units. I wanted to ask if anyone has some old hardware laying around that I
could get my hands on. I may be having some "baby Tenax" snaps replated and
may be able to throw these in with the batch.

In any event, I am looking for about 40 of these small #4 cup washers. The
attached pic shows a new one and a used one side b6y side. Thanks in
advance for your time and consideration.

Thx
Vic


-- 

*Vic PanzaCell: 412-956-2852*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/wpta/attachments/20250323/6ecac4cf/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: #4 flush washer-2.jpg
Type: image/jpeg
Size: 128197 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/wpta/attachments/20250323/6ecac4cf/attachment-0001.jpg>