[WPTA] Garage Floor Coating Project

[Ed Major]

That would be a quick job, I am sure you may find one square foot of unused space!

> On 08/16/2024 1:49 PM EDT EDWARD WOODS via Wpta <wpta at autox.team.net> wrote:
>  
>  
> Tom,
>  
> You’ll probably want to do mine first, just for practice!
>  
> Ed
> 
> > On 08/16/2024 11:51 AM EDT Thomas Schweitzer via Wpta <wpta at autox.team.net> wrote:
> >  
> >  
> > Hello WPTA,
> > I'm fully prepared to start my garage floor coating project this weekend.
> > I've done way more research than I'd care to admit, so hopefully everything goes smoothly.
> >  
> > If you are interested in doing your garage floors DIY, you're welcome to come checkout the process.
> > I've purchased everything I should need for the project, including a 10" Edco floor grinder, so I can show you the machinery you'll need, what coatings I'm using, how to test the hardness of your concrete, etc.
> >  
> > I've got 675 square feet to coat.
> > The DIY cost for a commercial grade Polyurea (what I'm using...) is about $1300.
> > So it's about $2 per square foot for the coating.
> > Depending on what machines you have to buy / rent, you'll probably have another $500 into rentals and incidentals.
> >  
> > I'm in Upper St Clair, near the USPS.
> > I'll send the address to anyone that would like to stop by.
> >  
> > Enjoy.
> > Tom
> >  
> > Tom Schweitzer
> > (412) 491-0261 tel:(412)491-0261 Cell
> >  
> > _______________________________________________
> > wpta at autox.team.net
> > 
> > -------------------------------------
> > 
> > http://www.wptriumph.org
> > 
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Unsubscribe/Manage: http://autox.team.net/mailman/options/wpta/fogbro1@comcast.net
> > 
> > 
> > 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/wpta/attachments/20240816/4fb54f61/attachment.htm>