[WPTA] Garage Floor Coating Project

[Thomas Schweitzer]

Hello WPTA,
I'm fully prepared to start my garage floor coating project this weekend.
I've done way more research than I'd care to admit, so hopefully everything goes smoothly.

If you are interested in doing your garage floors DIY, you're welcome to come checkout the process.
I've purchased everything I should need for the project, including a 10" Edco floor grinder, so I can show you the machinery you'll need, what coatings I'm using, how to test the hardness of your concrete, etc.

I've got 675 square feet to coat.
The DIY cost for a commercial grade Polyurea (what I'm using...) is about $1300.
So it's about $2 per square foot for the coating.
Depending on what machines you have to buy / rent, you'll probably have another $500 into rentals and incidentals.

I'm in Upper St Clair, near the USPS.
I'll send the address to anyone that would like to stop by.

Enjoy.
Tom

Tom Schweitzer
(412) 491-0261 Cell

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/wpta/attachments/20240816/66a4dfae/attachment.htm>