<div dir="ltr"><div>The screw is 1/4 inch.  I don't remember if fine thread: 28 tpi or coarse thread:20 tpi        For grins, I would get a known M6x1 fastener and see if it threads in.</div><div><br></div><div><br></div><div><br></div><div><br></div>--------- Forwarded message ----------<br>From: Roger Elliott <<a href="mailto:elliottr@rmi.net" target="_blank">elliottr@rmi.net</a>><br>To: <a href="mailto:triumphs@autox.team.net" target="_blank">triumphs@autox.team.net</a><br>Cc: <br>Bcc: <br>Date: Sun, 27 Apr 2025 18:20:35 -0500<br>Subject: [TR] Rocker Shaft locating screw<br>Anyone know what size the rocker shaft locating screw is? I just<br>received a rocker shaft that the screw will not go into.  Checked with<br>drill bits.  An 11/64 drill bit would go into old rocker shafts easily,<br>but not into the new one.<br><br>Shouldn't make any difference, but this is for a GT6 mark 1.<br><br>Thanks,<br>Roger Elliott</div>