<div dir="auto">Same issues with a Robbins vinyl top fitted on my TR250.  It is very tight, there was not really a lot of extra material to make it less tight.<div dir="auto"><br></div><div dir="auto">Installed myself, it looks good because no wrinkles, but best erected warm and in the sun.</div><div dir="auto"><br></div><div dir="auto">I make a point to store it with the top up every winter, if it shrank at all I would never get it back on.</div><div dir="auto"><br></div><div dir="auto">Greg Lemon</div><div dir="auto">TR250</div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Fri, Apr 11, 2025, 3:49 PM Dave MacKay <<a href="mailto:dave@mdmackay.ca">dave@mdmackay.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I experienced the same with a vinyl tonneau I got from Robbins for my<br>
TR3A.<br>
<br>
I had a professional install it. The installer complained that it was too<br>
small. When we compared it to the previous tonneau we could see that it<br>
was noticeably smaller. I sent it back to Robbins and they replaced it<br>
with a slightly larger version. Even that was VERY tight. Eventually we<br>
got it fitted but it was a bear. It wasn't a job I'd want to tackle<br>
myself.<br>
<br>
My convertible top is so tight that it's almost impossible to erect unless<br>
the car and top have been sitting in the sunshine on a hot day (which is<br>
exactly when I don't need it).<br>
<br>
I always contended that the darn things shrink. Dave's explanation of why<br>
that happens fits with my experience.<br>
<br>
Dave MacKay<br>
10960 TR3A s/n 68639L<br>
near Toronto, Canada<br>
<br>
>From: Robert Rochlin <<a href="mailto:rrochlin@comcast.net" target="_blank" rel="noreferrer">rrochlin@comcast.net</a>><br>
>To: dave northrup <<a href="mailto:dave@ranteer.com" target="_blank" rel="noreferrer">dave@ranteer.com</a>>, <a href="mailto:triumphs@autox.team.net" target="_blank" rel="noreferrer">triumphs@autox.team.net</a><br>
>Subject: Re: [TR] TR6 top R&R<br>
><br>
>The top looks great, but is a bear to get up when the weather is cool. I<br>
spoke to a very experienced >top installer years later about how tight the<br>
top was going up and he told me that that the rear >section of the Robbins<br>
cloth top is cut too small and it make sit hard to get the top perfect.<br>
He >said that vinyl tops were more forgiving.<br>
<br>
>From: DAVID MASSEY <<a href="mailto:dave1massey@cs.com" target="_blank" rel="noreferrer">dave1massey@cs.com</a>><br>
>To: dave northrup <<a href="mailto:dave@ranteer.com" target="_blank" rel="noreferrer">dave@ranteer.com</a>>,  "<a href="mailto:triumphs@autox.team.net" target="_blank" rel="noreferrer">triumphs@autox.team.net</a>"<br>
>Subject: Re: [TR] TR6 top R&R<br>
><br>
>Ditto.? For the same reasons.? Unless you are looking at doing several,<br>
there is too much learning >curve.<br>
><br>
>Vinyl and the rubber layer on canvas tops all have a chemical called an<br>
elastomer.? This makes >the plastic flexible (stretchable) but this<br>
chemical will dissipate (evaporate) over time and the >material will not<br>
stretch as before.?<br>
><br>
>This has worked for me on both vinyl and canvas tops.<br>
><br>
>Correction.? I used the term "elastomer" when I should have said<br>
"plasticizer."<br>
>Another example:? Many years ago I was given a TR6 top by an acquaintance<br>
who bought it 20 >years previously but wrecked his car before he had a<br>
chance to have it installed.? In other words, >this top sat in his<br>
basement for 20 years before I had it installed.? This was the easiest top<br>
to put >up and down in all my experience.? I believe it is because the<br>
plasticizers had all dissipated and >the top did not stretch when the<br>
installer got his hands on it.? So it didn't "shrink" after<br>
>installation.? It went up easily in any weather.??<br>
** <a href="mailto:triumphs@autox.team.net" target="_blank" rel="noreferrer">triumphs@autox.team.net</a> **<br>
<br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/pipermail/triumphs" rel="noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/triumphs</a>  <a href="http://www.team.net/archive" rel="noreferrer noreferrer" target="_blank">http://www.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com</a><br>
</blockquote></div>