It's the same sad story on a TR6.  They get routed with the turn signal wires.  And the trough isn't big enough.  I fought thia with my TR6 and it took me an inordinant amount of time.  <div><br></div><div>I'd categorize this as one of those not so easy things.  A partial disassembly of the steering column is in the works.</div><div><br></div><div>Dave<br><br><div id="ymail_android_signature"><a id="ymail_android_signature_link" href="https://play.google.com/store/apps/details?id=com.aol.mobile.aolapp">Sent from AOL on Android</a></div> <br> <blockquote style="margin: 0 0 20px 0;"> <div style="font-family:Roboto, sans-serif; color:#6D00F6;"> <div>On Sat, Jul 1, 2023 at 11:41, Anthony Rhodes</div><div><spamiam@comcast.net> wrote:</div> </div> <div style="padding: 10px 0 0 20px; margin: 10px 0 0 0; border-left: 1px solid #6D00F6;"> <div dir="ltr">I am looking for advice, even photos, of how to route the wires from an overdrive switch (mounts to the left hand escutcheon) on my left hand drive TR4A<br></div><div dir="ltr"><br></div><div dir="ltr">I am going to be adding an overdrive to my transmission this fall, and I am trying to get the “easy stuff” done ahead of time.  <br></div><div dir="ltr"><br></div><div dir="ltr">As I look at the column with the original escutcheon halves removed, I do not see a good way to get the wires into the column “head” to join the other switch wires.   There does not seem to be much room to feed them in without pinching against the metal of the column, but if it goes forward of the turn signal switch.   And if the wires pass rearward of that switch then they could interfere with the self-cancelling mechanism.<br></div><div dir="ltr"><br></div><div dir="ltr">And then once the wires are in there, how do they get fed down and out the column to go into that long narrow cover on the bottom of the column along with the other wires<br></div><div dir="ltr"><br></div><div dir="ltr">And those wires already there seem to completely FILL the available space inside that cover!<br></div><div dir="ltr"><br></div><div dir="ltr">How do I free up that cover to get<br></div><div dir="ltr">It loose enough to pass the OD wires?<br></div><div dir="ltr"><br></div><div dir="ltr">So many questions!!!  Sorry!!<br></div><div dir="ltr"><br></div><div dir="ltr">-Tony<br></div><div dir="ltr"><br></div><div dir="ltr">** <a ymailto="mailto:triumphs@autox.team.net" href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a> **<br></div><div dir="ltr"><br></div><div dir="ltr">Donate: <a href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br></div><div dir="ltr">Archive: <a href="http://www.team.net/pipermail/triumphs" target="_blank">http://www.team.net/pipermail/triumphs</a>  <a href="http://www.team.net/archive" target="_blank">http://www.team.net/archive</a><br></div><div dir="ltr"><br></div><div dir="ltr">Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com" target="_blank">http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com</a><br></div> </div> </blockquote></div>