<div dir="auto"><div data-smartmail="gmail_signature">I rebuilt mine for the TR2.  used fine valve lapping compound on the taper and cut a rubber washer from red/orange rubber I had around the shop. I greased up the rubber and no leaks.  Hardest thing was finding a spring.</div><div data-smartmail="gmail_signature" dir="auto"><br></div><div data-smartmail="gmail_signature" dir="auto">Never had leaks at the threads.  I have done the belt and suspenders thing, teflon tape plus teflon pipe dope on ornery fittings with good sucess.</div></div>